Process Hazard Analysis and Layer of Protection Assessment Course
Conduct rigorous process hazard analysis and LOPA through scenario definition, consequence assessment, safeguard validation and action closure.
Training Locations
This Process Hazard Analysis and Layer of Protection Assessment Course is available in multiple cities. Please select your preferred location from the list below
Durrës
Albania
Tirana
Albania
Andorra la Vella
Andorra
Escaldes-Engordany
Andorra
Innsbruck
Austria
Salzburg
Austria
Vienna
Austria
Gomel
Belarus
Minsk
Belarus
Antwerp
Belgium
Brussels
Belgium
Banja Luka
Bosnia and Herzegovina
Sarajevo
Bosnia and Herzegovina
Plovdiv
Bulgaria
Sofia
Bulgaria
Dubrovnik
Croatia
Split
Croatia
Zagreb
Croatia
Limassol
Cyprus
Nicosia
Cyprus
Brno
Czech Republic
Prague
Czech Republic
Aarhus
Denmark
Copenhagen
Denmark
Tallinn
Estonia
Tartu
Estonia
Helsinki
Finland
Tampere
Finland
Lyon
France
Marseille
France
Nice
France
Paris
France
Berlin
Germany
Frankfurt
Germany
Hamburg
Germany
Munich
Germany
Athens
Greece
Thessaloniki
Greece
Budapest
Hungary
Debrecen
Hungary
Akureyri
Iceland
Reykjavík
Iceland
Cork
Ireland
Dublin
Ireland
Florence
Italy
Milan
Italy
Naples
Italy
Rome
Italy
Pristina
Kosovo
Prizren
Kosovo
Liepāja
Latvia
Riga
Latvia
Schaan
Liechtenstein
Vaduz
Liechtenstein
Kaunas
Lithuania
Vilnius
Lithuania
Esch-sur-Alzette
Luxembourg
Luxembourg City
Luxembourg
Kuala Lumpur
Malaysia
St. Julian's
Malta
Valletta
Malta
Bălți
Moldova
Chișinău
Moldova
La Condamine
Monaco
Monte Carlo
Monaco
Budva
Montenegro
Podgorica
Montenegro
Amsterdam
Netherlands
Rotterdam
Netherlands
The Hague
Netherlands
Ohrid
North Macedonia
Skopje
North Macedonia
Bergen
Norway
Oslo
Norway
Gdańsk
Poland
Kraków
Poland
Warsaw
Poland
Faro
Portugal
Lisbon
Portugal
Porto
Portugal
Bucharest
Romania
Cluj-Napoca
Romania
City of San Marino
San Marino
Serravalle
San Marino
Belgrade
Serbia
Novi Sad
Serbia
Singapore
Singapore
Bratislava
Slovakia
Košice
Slovakia
Bled
Slovenia
Ljubljana
Slovenia
Barcelona
Spain
Madrid
Spain
Valencia
Spain
Gothenburg
Sweden
Stockholm
Sweden
Bern
Switzerland
Geneva
Switzerland
Zurich
Switzerland
Istanbul
Turkey
Kyiv
Ukraine
Lviv
Ukraine
Odesa
Ukraine
Dubai
United Arab Emirates
Birmingham
United Kingdom
Edinburgh
United Kingdom
London
United Kingdom
Manchester
United Kingdom
Rome (Vatican-adjacent)
Vatican City
Vatican City
Vatican City
Training Outlines
Introduction
This course develops the analytical discipline required to identify process hazards and determine whether protection is adequate. Participants prepare and facilitate process hazard analyses, define credible scenarios, assess consequences and frequencies, validate independent protection layers and document risk decisions.
Objectives
- Select appropriate process hazard-analysis methods and scope.
- Prepare process safety information, nodes and study boundaries.
- Facilitate structured HAZOP and complementary analyses.
- Develop credible cause-consequence scenarios.
- Distinguish safeguards from independent protection layers.
- Perform semi-quantitative layer-of-protection assessments.
- Identify risk gaps and proportionate additional controls.
- Document, close and revalidate PHA and LOPA actions.
Course Outlines
Day 1: PHA Purpose, Preparation and Governance
- PHA role in process safety
- Study timing and lifecycle triggers
- Scope and boundary definition
- Process safety information quality
- Team composition and facilitation
- Assumptions, criteria and documentation
Day 2: Hazard Identification Methods
- HAZID and checklist studies
- What-if analysis
- HAZOP nodes and guidewords
- Failure modes and effects analysis
- Fault-tree and event-tree context
- Method selection and combination
Day 3: Scenario and Consequence Development
- Initiating causes and deviations
- Loss-of-containment scenarios
- Consequence severity estimation
- Enabling conditions and modifiers
- Human and organisational factors
- Scenario completeness review
Day 4: Layer of Protection Assessment
- LOPA workflow and risk criteria
- Initiating-event frequency
- Independent protection-layer criteria
- Probability of failure on demand
- Conditional modifiers and dependencies
- SIL determination interface
Day 5: Risk Decisions and Study Assurance
- Gap identification and recommendations
- Hierarchy and quality of safeguards
- Action ownership and closeout
- Documentation and peer review
- Revalidation and management of change
- PHA and LOPA case simulation
Training Schedule
Below is the table of cities along with the respective dates for the upcoming training sessions of Process Hazard Analysis and Layer of Protection Assessment Course. Please review the schedule to find the most convenient option for you. You can also use the below search bar to type the city name and filter the results.
| City | Start Date | End Date | Fees | Details |
|---|---|---|---|---|
| Select the Training Schedule tab to load 2644 sessions. | ||||
Related Courses
Air Quality Monitoring and Emission Control Technologies
- One Week
- Confirmed
Behavior Based Safety Leadership and Culture Development
- One Week
- Confirmed
Chemical Safety and Globally Harmonized System Classification
- One Week
- Confirmed
Climate Change Adaptation and Resilience in Industrial Operations
- One Week
- Confirmed
Confined Space Entry Safety and Rescue Techniques
- One Week
- Confirmed
Construction Site Safety Management and Regulatory Compliance
- One Week
- Confirmed
Contractor Safety Management and Prequalification Processes
- One Week
- Confirmed
Driving Safety and Defensive Fleet Management
- One Week
- Confirmed